Milwaukee MW801 PRO pH/EC/TDS Meter

The practical and easy-to-use 3-in-1 MW801 Smart pH/EC/TDS meter gives you accurate measurements of the pH and TDS values with a single probe and device. It also measures the conductivity with automatic temperature compensation (0 -50 °C). These values need to be kept within certain limits in aquarium water to ensure that all the creatures in the aquarium remain healthy and happy. For use in aquariums, aquaponics and water treatment facilities.

With no cables and only a single resistive electrode, the tough and lightweight meter is easily portable. The probe on this smart device can be replaced - SE600 probe for pH/EC/TDS. A connector is attached to the integrated pH sensor to minimise contamination when measuring fertiliser solutions. The readings are shown on an LCD display. The device is already factory calibrated, but can be recalibrated using a one-point calibration for pH and EC.

Instructions for Storage and Care:

With regular care and proper maintenance, this measuring device will last a long time and deliver reliable, accurate results.

► Tips for proper care of the 3-in-1 meter:

• Always store the meter with the cap filled with buffer or storage solution. Never store it in water.
• Clean the device regularly. Soak it in the cleaning solution.
• Calibrate it after cleaning and/or storing the device. This will compensate for changes in the EC and pH sensors.
• Gently stir the probe in the sample for faster results.